Engraving and milling machine: as the name suggests. It can be carved or milled. Based on the engraving machine, the power of the spindle and servo motor is increased, and the bearing capacity of the bed is increased. At the same time, the high speed of the spindle is maintained, and more importantly, the precision is very high. Engraving and milling machines are also developing at a high speed, generally known as high-speed machines. They have stronger cutting ability and very high machining accuracy. They can also directly process materials with hardness above HRC60 for one-time forming. It can be cut or cut. Pay attention to cleaning and maintenance in normal use, which can prolong its service life. Machines are like people. They often take care of them and look more energetic. Many people think that the engraving and milling machine does not need to be cleaned. It's OK to properly tidy the table when it's used. Why? Because they all think that there is a lot of dust in the working process of the engraving and milling machine, that is to say, it is something used in the dust. If you clean it up every day, how troublesome it should be. Therefore, many are not only not organized, but also allowed to pile up things on the machine, which is wrong.

Engraving and milling machines are mostly used in processing affairs, which produces more powder and dust. During operation, pay attention to the cleaning and smoothness of screw rod, polished rod and other parts, clean the accumulated dust and add oil to the transmission parts in time; The operator shall clean and refuel in time, and it is strictly prohibited to plug and unplug with electricity.

Moreover, the usual protection of engraving and milling machine is also appropriate and important:

1. The continuous operation time of the engraving and milling machine is less than 10 hours a day to ensure the cleaning of the cooling water and the normal operation of the water pump. Never make the water-cooled spindle motor lack water. Replace the cooling water on time to prevent the water temperature from being too high.

2. At the end of each operation of the engraving and milling machine, pay attention to sorting, be sure to clean the dust on the platform and transmission system, and regularly (weekly) refuel the transmission system (x.y.z three-axis) smoothly.

3. If the engraving and milling machine is not necessary for a long time, it should be refueled and idled regularly (weekly) to ensure the flexibility of the transmission system.

4. The engraving and milling machine shall regularly (according to the application) sort out the dust in the electrical box and check whether the screw of the wiring terminal is loose, so as to ensure the safe and reliable application of the circuit.

5. The engraving and milling machine shall check whether the screws of various parts of the machine are loose regularly (according to the application).